Gas Detector Replacement Parts

Allows direct connection between the Cub docking station and the computer.

Ensures seal integrity of the PID sensor.

Cable to connect the docking station to an UK mains socket.

Ensures calibration gas is presented to the MiniPID sensor evenly and at ambient air pressure. Allows connection to a typical 1/4" ID pipe.

Ensures seal integrity of the PID sensor.

Protects the PID from damage caused by general use.

PTFE filter blocks the ingress of water. The PTFE filters should be checked regularly to ensure best ongoing performance.

Cable to connect the docking station to an EU mains socket.

Cable to connect the docking station to an Australian mains socket.

Cable to connect the docking station to an US mains socket.

Designed for use within the ION Science PID sensor.

Allows the Cub docking station to be joined together and evenly spaced whilst securing multiple docking stations to the surface.

Firmly grips a pocket, collar or belt ensuring the Cub remains attached to you.

PTFE filter blocks the ingress of water. When replacing the PTFE filter we recommenced you also change the O-rings.

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

The docking station charges the Cub and Cub TAC instrument. There are three variants available: Charge Docking Station, Charge Docking Station + Data Download and Charge Docking Station + Data Download + Calibration.

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.