Ensuring that staff and medical environments (including treatment, manufacture, or research and development spaces) are protected against potential harmful exposures is essential for employers. Medical environments are often indoor spaces with limited natural ventilation, increasing the possibility of VOCs (volatile organic compounds) building quickly to dangerous levels.

ION Science’s range of fixed PID (photoionization detection) sensors can measure VOC outputs on multiple large sites or single key areas, using world-leading gas detection instrumentation.

One of the most important areas for VOC monitoring is the sterilization and packaging of medical equipment. It is common practice for manufacturers to use ethylene oxide to decontaminate products prior to leaving the site. While this is a highly effective method, it is a harmful VOC and needs careful monitoring when in use. It is critical to reduce the potential exposure for staff, products and even end-users, so monitoring levels of ethylene oxide that are used to remove potential contaminants must be done with a safety-first approach prior to distribution.

In medical environments such as hospitals, there is also a potential VOC hazard. Toluene is often used for the preparation of medical instruments and in laboratories, and was a commonly reported VOC hazard in a 2015 study1. The study revealed that staff coming into contact with toluene were in some cases receiving up to 16 times higher doses of VOC exposure than other staff who didn’t work in those spaces. Appropriate VOC monitoring, such as fixed sensors in these workspaces and buildings, would have been able to detect the hazardous levels and ultimately reduce the health risk for staff.

For manufacturers that handle large volumes of products or operate across multiple sites, ethylene oxide may be used frequently and at multiple stages of the manufacturing cycle. This requires not only highly sensitive levels of detection to ensure that the correct levels are being adhered to at particular stages, but also there is a requirement to have many sensors on and around the site, so any potentially harmful levels are detected quickly.

ION Science works globally with companies within the sterilization and medical equipment industry providing a complete VOC monitoring solution. The Falco provides customers with a complete monitoring assurance of VOCs at every stage of production. The Falco needs little in the way of maintenance and will reliably record data on VOC exposure wherever needed. The Falco is enabled with both Modbus and 4-20mA output protocols for site-wide networking capabilities. This gives total confidence that all equipment is sterilized within the legal requirements.

Not only does the Falco fixed fenceline detector provide complete assurance across sites of any size, but other benefits also include a user-friendly interface and an easy fit and service design. The internal lamp comes with a minimum one-year lifespan, giving customers reliability and peace of mind.

Falco has four detection ranges available:

  • 0–10ppm
  • 0–50ppm
  • 0–1,000ppm
  • 0–3,000ppm

ION Science is proud to be supporting the medical and pharmaceutical sectors with their advanced PID technology and VOC gas detection instruments for safe working environments and end-products. By working with customers on the ground to equip their sites and find solutions, ION Science continues to advance and develop its portfolio to improve safety and health for all.

To find out more about how ION Science can support with ensuring that staff and medical environments are protected against potential harmful exposures, inquire now:

Please complete the form below and a member of our team will contact you shortly.