SF6 LeakCheck P1:p

SF6 gas leak detector

The SF₆ LeakCheck P1:p is an award winning SF₆ gas leak detector that uses negative Ion Capture (NIC) technology designed for location, leak testing and detection of SF₆ leaks in high electrical switchgear.

The SF₆ gas leak detector rapidly detects SF₆ gas leaks down to 1 x 10-8 ml/sec with a quick clear down of less than 1 second. The SF₆ gas leak detector is unaffected by the exposure to large SF₆ gas leaks and will continue to remain uncontaminated even after the exposure to 100% SF₆ gas.

Inquire Now Download Brochure

Back to all Semi Portable Gas Detectors

SF6 Gas Leak Detector – Features

The SF₆ gas leak detector has a range of accessories available including the 5, 10 and 15 metre extension hose and the 300 & 500mm flexible probe extender.

Ultimate Performance

Ultra high sensitivity with a 1 x 10-8 ml/sec* (*Highsense option)
Unaffected by large SF6 gas leaks and 100% SF₆ meaning no frustrating delays between searches
Lightweight ergonomically designed hand sensor

Ultimate Safety

1 second rise and clear down for rapid SF6 gas leak detection
Simple data storage and printing for analysis
Non-radioactive source for easy storage and transportation

Ultimate Flexibility

No training required – switch on and go
Choice of display units cc/sec, gm/yr and ppm for monitoring conformance to leak minimisation targets

Technical Specification

Specification	Value
Measurement Principles	Negative Ion Capture (NIC): a non radioactive, non-restricting carriage and no licensing required
Sensitivity	Standard SF₆ GasCheck p1 and LeakCheck P1:p 1 x 10-7 ml/sec, 1 ppm, 0.01 gm/yr SF₆ Highsense option 1 x 10-8 ml/sec, 0.1 ppm, 0.001 gm/yr SF₆
Response	T₉₀ = < 1 second rise and clear down
Operation	Lead acid battery, internal and fully protected Recharge between 85-265 AC V, 50/60 Hz
Alarm	Audio and visual with an optional handset alarm
Measurement Units	Measurement in l/sec, gm/yr and ppm Range: Each unit 1 – 500 Accuracy: ± 5 % of displayed leak rate or ± 2 digits Repeatability: ± 1 digit
Calibration	Via CalCheck calibration accessory
Data Logging	Over 500 data points with date and time stamp Download via RS232 to a PC
Temperature	Storage: – 10 to 60 °C (14 to 140 °F) Operating; 0 – 50 °C (32 to 122 °F)
Weight and Dimensions	Consol: 500 x 400 x 190 mm (19.7 x 15.7 x 7.5″) Shipped: 520 x 430 x 10 mm (20.5 x 6.9 x 8.3″) Shipped 15 kg (33lbs)

* All specifications quoted are at calibration point and under the same ambient conditions.
Specifications are based on isobutylene calibration at 20 ˚C, 90% RH and 1000 mBar
*Model dependant.

Download Brochure

Downloads

For further supporting documentation for SF₆ gas leak detector, please see below.

SF6 Gas Leak Detector – Accessories and Replacement Parts

There are a number of accessories and replacement parts available for the SF₆ gas leak detector, which can be found below. Please contact us if you would like more information or to place an order.

FAQs

If you have any further questions, please inquire now.

Are ION Science part of the WEEE Compliance Scheme?

Global Distributors

All ION Science distributors are trained to the highest standards to provide you with access to our product portfolio locally, along with the best possible service and support. Find your local representative.

Where to buy

Inquire Now