Articoli applicativi
Gli articoli sulle applicazioni forniscono informazioni dettagliate su come i rilevatori di gas ION Science vengono utilizzati in una varietà di settori e applicazioni.
Casa » Rilevatori di gas e di fughe » Centro risorse » Articoli applicativi
Gli articoli sulle applicazioni forniscono informazioni dettagliate su come i rilevatori di gas ION Science vengono utilizzati in una varietà di settori e applicazioni.
Un gas comune per la sterilizzazione delle apparecchiature mediche destinate all'uso medico è l'ossido di etilene (EtO) EH40, ma deve essere monitorato!
© 2024 Ion Science Italy. Ion Science è un marchio registrato su Ion Science Ltd
Diffusion Fixed Gas Detection Device
A diffusion gas detection device works, as the name suggests, on the diffusion principle. The sensor is exposed to the ambient air and will measure the gas by means of the diffusion principle. Diffusion means proportional spread of molecules over the available space (from high concentration to low concentration). This also means that a diffusion gas detection device is only able to measure the concentration of gases at the location where the device is located. Since there is no forced flow of the gas to be measured, this device is not suitable for taking measurements remotely, but they do accurately identify what’s present in a given location.
Pumped Fixed Gas Detection Device
Pumped instruments are equipped with a built-in sampling pump. This means that the device is constantly drawing in gases. A sampling hose may be connected to extend the reach. This means that you can take a measurement from a safe distance so you have an idea of which gases will be present in which concentration before you are exposed to this environment. This allows you to make an appropriate risk analysis and make the right strategy and PPE choices based on the measurement results. By positioning the measuring hose correctly, you can also make a correct measurement at different heights to chart all risks.
Request a quote — HubSpot form
Register your instrument placeholder for Hub Spot Form
Scorri per confrontare più sensori OEM
Scorri per confrontare tutti i sensori di gas OEM, seleziona per nascondere i sensori per confrontare le varianti più adatte.
Nascondere | ||||||||
---|---|---|---|---|---|---|---|---|
Specifiche Comparative | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
Variante del sensore | MiniPID 2 PPM WR | MiniPID 2 PPM | MiniPID 2 PPB WR | MiniPID 2 PPB | MiniPID 2 HS | MiniPID 2 10.0 eV | MiniPID 2 11.7 eV | MiniPID 2 PPB XF |
Colore pila elettrodi | Blu | Blue | Bianca | Bianca | Rosso | Spot bianco + oro | Bianca | Bianco + Filtro |
Limite di rilevamento minimo | 500 ppb | 100 ppb | 20 ppb | 1 ppb | 0.5 ppb | 5 ppb | 100 ppb | 1 ppb |
Gamma | 0 to >10,000 ppm | 0 to 4000 ppm | 0 to >200 ppm | 0 to >40 ppm | 0 to >3 ppm | 0 to >100 ppm | 0 to >100 ppm | >40 ppm |
Tempo di risposta T90 (s) | <3 | <3 | <8 | <8 | <12 | <8 | <8 | <12s |
Sensibilita | >0.4 mV/ppm @ 100 ppm | >0.65 mV/ppm @ 100 ppm | >5 mV/ppm | >30 mV/ppm | >600 mV/ppm | >15 mV/ppm | >1 mV/ppm | >30 mV/ppm |
Energia della lampada | 10.6 eV | 10.6 eV | 10.6 eV | 10.6 eV | 10.6 eV | 10.0 eV | 11.7 eV | 10.6eV |
Dettagli del prodotto | Dettagli del prodotto | Dettagli del prodotto | Dettagli del prodotto | Dettagli del prodotto | Dettagli del prodotto | Dettagli del prodotto | Dettagli del prodotto |