Falco TAC Pumped - Fixed Gas Monitor

Falco TAC Pumped

Fixed Gas Monitor

The Falco TAC pumped is a fixed gas monitor that eliminates false readings found with other fixed has monitors and continuously monitors Volatile Organic Compounds (VOCs) in hazardous areas. The Falco TAC pumped, fixed gas monitor uses a sample line to draw samples and is ideal for use in difficult locations such as underground or in confined spaces.

IECEx certification ATEX certfication qps_ certification

Inquire NowDownload Brochure

Fixed Gas Monitor – Features

Falco, our fixed gas monitor, has an externally located Intrinsically Safe sensor for quick and easy servicing without the need for a hot work permit. Dual certification allows your fixed gas monitor to be serviced and calibrated in a hazardous environment without having to remove power!

The standard Falco, fixed gas monitor, both pumped and diffused models are supplied with a 10.6 eV lamp allowing the instrument to monitor a wide range of VOC gases. The Falco VOC monitor has 4 monitoring ranges available, these ranges include 0 – 10 ppm, 0 – 50 ppm, 0 – 1000 ppm and 0 – 3000 ppm.

The Falco TAC, both Pumped TAC and Diffused TAC models, utilise a 10.0 eV lamp to monitor Total Aromatic Compounds (TACs) which help focus on benzene. The Falco TAC is available with a monitoring range of 0 – 50 ppm.

Ultimate Performance

  • The only VOC monitor specifically designed for extreme weather
  • Typhoon technology stops condensation forming with the PID
  • Cutting-edge sensor performance minimises drift & downtime

Ultimate Safety

  • Eliminates false readings found with competing PID technology
  • Multi-coloured status display can be seen from 20 metres in sunlight
  • Fitted with long-life lamp for one year continuous use
  • Ex d approved

Ultimate Flexibility

  • Pumped and diffused models available
  • Pumped unit idea for difficult to access locations
  • Four monitoring ranges available
  • Selectable response factor for varying VOC selection

Technical Specification

IECEx certification ATEX certfication qps_ certification

Specification
Value
Sensor Photoionisation detector
Detection ranges and sensitivity with 10.6 eV lamp fitted* 10.0 ppm, 0.001 ppm
50.0 ppm, 0.01 ppm
1000 ppm, 0.1 ppm
3000 ppm, 1 ppm
Detection ranges and sensitivity with 10.0 eV lamp fitted* 50.0 ppm, 0.01 ppm
Response Time (T90) Pumped models: <10 seconds**
Accuracy ± 5 % or ± 1 digit
User Interface OLED high contrast white on black: 128 x 64 pixels
Screen size: 35 mm (w) x 17.5 mm (h)
5 magnetic switches with LED confirmation (up, down, left, right and enter)
Status indicator Bright visible status indicator: RED, AMBER, GREEN
Output 4 – 20 mA
2 programmable relays
RS 485 Modbus
Falco diffused environmental specification Operational Temperature: – 40 to 50 °C 0-100 % RH and condensing humidity
Storage temperature: – 40 to 60°C
Ingress Protection Main Unit:IP65
Sensor Head: IP65
Power Working voltage: 12 to 40 Vdc
Typical 2 W, Max 7 watts
Mechanical Interface 2 x cable entry points with 3/4″ NPT threads (left and right)
Mounting Points 2 x M8
Weight and Dimensions 3.3 kg
291 (h) x 191 (w) x 125 (d) mm
EMC EMC Directive 2014/30/EU
Certification II 2G db ib IIC T4 Gb
Class 1, Div 1 Groups ABCD T4
ISO9001:2015

* All specifications quoted are at calibration point and under the same ambient conditions.
Specifications are based on isobutylene calibration at 20 °C and 1000 mBar.
** When set to continuous measurement
Modbus® is a registered trademark of Schneider Electric

Download Brochure

Video Library

Falco – Fixed Gas Detector

The Falco & Falco TAC is a fixed VOC detector that eliminates false readings found with other competing technology and continuously detection Volatile Organic Compounds (VOCs) in hazardous areas.

Benzene related products from ION Science

With work exposure limits so low it has never been more important to have equipment that can detect benzene down to ppb levels.

Downloads

For further supporting documentation for Falco TAC pumped, fixed gas monitor please see below.

Falco TAC Pumped, Fixed Gas Monitor – Accessories and Replacement Parts

There are a number of accessories and replacement parts available for the Falco, fixed gas monitor which can be found below. Please contact us if you would like more information or to place an order.

FAQs

If you have any further questions, please inquire now.

Are ION Science part of the WEEE Compliance Scheme?

What response factor do I need?

Global Distributors

All ION Science distributors are trained to the highest standards to provide you with access to our product portfolio locally, along with the best possible service and support. Find your local representative.

Falco TAC Pumped, Fixed Gas Monitor Inquiry Form

Please complete the form below and a member of our team will contact you shortly.