Gas Detector Replacement Parts

Can charge a Tiger XT lithium ion battery in just 8 hours. It can charge battery packs separately or connected to the instrument.

Filter clamp holds the PTFE filter in place and ensures an air tight seal in conjunction with the O-ring.

Offers up to 24 hours of continuous use.

The sensor cover is screwed to the back of the Tiger XT models to protect the MiniPID 2.

Allows VOC readings from the Tiger XT to be logged to a separate RS232 device.

Used for MiniPID 2 10.0 eV Sensor. Found in Tiger XT Select, Cub TAC and can also be used in Tiger XT with 10.0 eV configuration.

Used to protect the instrument from debris and water ingress.

The probe seal sits in the filter clamp to keep it air tight.

Used to make an air tight seal ensuring all gas passes through the PTFE filter.

For use with the charge cradle, allows direct connection with UK, US, EU and AUS power sockets.

Ensures the filter clamp is held in place ensuring a leak tight seal.

Screws into the exhaust port of the instrument allowing gas to be captured into a sample bag via typical 1/4 ID pipe.

Connects to a typical 1/4

Fast direct connection between the Tiger instrument range and a computer.

The probe attaches easily and securely to the end of the instrument.

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

The screw is used to keep the sensor cover attached to the back of the Tiger models.

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.