Falco 2 Pumped Gas Detector
Fixed VOC Gas Detection 0 – 50 ppm
Detection Range: 0 – 50 ppm
Stack Colour: Orange
Lamp: 10.6 eV
Calibration Points: 2 – points
Sensitivity: 0.01 ppm
Fixed VOC Gas Detection 0 – 50 ppm
The Falco 2 Pumped is a fixed VOC gas monitor that eliminates false readings found with other competing technology and continuously monitors Volatile Organic Compounds (VOCs) in hazardous areas. The Falco 2 pumped, fixed VOC gas monitor uses a sample line to draw samples and is ideal for use in difficult locations such as underground or in confined spaces.
The Falco 2 pumped VOC detector gives you cutting-edge performance; reliability, accuracy and results you can trust so you can be sure your workforce and plant receive on-going maximum protection. With its humidity resistance and anti-contamination design drift is minimised and run-time extended, saving both time and cost to your business. All our Falco 2 detectors are designed and manufactured to withstand exceptionally harsh environments, including 0-100% relative humidity and condensing humidity, and temperatures from -40 to +50 °C without any compromise in performance.
Offering the ultimate in safety, Falco 2 pumped eliminates false readings found with other competing PID technology. Its multi-coloured LED status display can be seen from a distance of twenty meters in sunlight ensuring you are clearly alerted to hazards present.
The Falco 2 Pumped Kit Includes
Enabled with both Modbus and 4-20mA output protocols the Falco 2 offers site-wide networking capabilities, making it equally suitable for large refineries, smaller manufacturing plants or even wastewater processing sites. With the ability to place Falco 2 wherever it’s needed with confidence, the device assures end users that whether you’re monitoring VOCs in one area of the plant or want to cover a whole site, Falco 2 can deliver the results you need.
Our standard kits contains the following:-
- Falco 2 MiniPID (6-Pin) Orange
- Warranty Registration Card
- Safety Notice for Falco 2 Instrument
- Falco 2 QSG – Hydrophobic Filter Instruction
- PID Lamp Cleaning Kit
- Falco 2 with pump c/w Rj45 Cable
- MiniPID Electrode Stack Removal Tool
- Hydrophobic Filter 50mm Female Luer to ¼” barb (x1)
- Label “Important: Hydrophobic Filter MUST be fitted”
- Package Information Card
Technical Specification
Specification | Value |
|---|---|
| Sensor | Photoionisation detector |
| Detection ranges and sensitivity with 10.6 eV lamp fitted* | 10.0 ppm, 0.001 ppm 50.0 ppm, 0.01 ppm 1000 ppm, 0.1 ppm 3000 ppm, 1 ppm |
| Detection ranges and sensitivity with 10.0 eV lamp fitted* | 50.0 ppm, 0.01 ppm |
| Response Time (T90) | Pumped models: <10 seconds** |
| Accuracy | ± 5 % or ± 1 digit |
| User Interface | OLED high contrast white on black: 128 x 64 pixels Screen size: 35 mm (w) x 17.5 mm (h) 5 magnetic switches with LED confirmation (up, down, left, right and enter) |
| Status indicator | Bright visible status indicator: RED, AMBER, GREEN |
| Output | 4 – 20 mA 2 programmable relays RS 485 Modbus |
| Falco diffused environmental specification | Operational Temperature: – 20 to 50 °C 0-100 % RH and condensing humidity Storage temperature: – 20 to 60°C |
| Ingress Protection | Main Unit:IP65 Sensor Head: IP65 |
| Power | Working voltage: 8 to 40 Vdc Typical 2 W, Max 7 watts |
| Mechanical Interface | 2 x cable entry points with M25 threads (left and right) |
| Mounting Points | 2 x M8 |
| Weight and Dimensions | 2.9 kg 325 (h) x 192 (w) x 115 (d) mm |
| EMC | EMC Directive 2014/30/EU |
| Certification | II 2G db ib IIC T4 Gb ISO9001:2015 |
* All specifications quoted are at calibration point and under the same ambient conditions.
Specifications are based on isobutylene calibration at 20 °C and 1000 mBar.
** When set to continuous measurement
Modbus® is a registered trademark of Schneider Electric
Accessories and Replacement Parts
There are a number of accessories and replacement parts available for the Falco 2 fixed voc gas detector, which can be found below. Please contact us if you would like more information or to place an order.
Related Products
Falco pumped 0-10
Falco TAC Diffused, fixed gas detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.
Falco 2 pumped 0-1000
Falco TAC Diffused, fixed gas detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.
Falco 2 pumped 0-3000
Falco TAC Diffused, fixed gas detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.
Falco 2 pumped 0-50
Falco TAC Diffused, fixed gas detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.
Falco 2 pumped 0-50tac
Falco TAC Diffused, fixed gas detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.
SF6 AreaCheck P2 – Fixed Gas Detector
Fixed SF6 gas detector uses award winning Negative Ion Capture (NIC) technology and is designed to continuously monitor SF6.
TVOC 2 Continuous VOC Gas Detector
TVOC 2 is a fixed, continuous VOC gas detector that accurately detects and measures Total Volatile Organic Compounds within industrial working environments.
FAQs
If you have any further questions, please enquire now.
United Kingdom
USA
France
India
China
Italy
Germany
