Gas Detector Replacement Parts

Please select your ION Science Gas Detector or Leak Detector from the drop down list to view all available replacement parts for your instrument.

Filter Clamp

Filter clamp holds the PTFE filter in place and ensures an air tight seal in conjunction with the O-ring.


Contact us to place an order quoting the below part number.

Part number: 861579
Charge Cradle

Can charge a Tiger lithium ion battery in just 6.5 hours. It can charge battery packs separately or connected to the instrument.


Contact us to place an order quoting the below part number.

Part number: A-861220
Probe

The probe attaches easily and securely to the end of the instrument.


Contact us to place an order quoting the below part number.

Part number: 880207
Sensor Cover

The sensor cover is screwed to the back of the Tiger models to protect the MiniPID 2.


Contact us to place an order quoting the below part number.

Part number: A-861259
Probe Seal

The probe seal sits in the filter clamp to keep it air tight.


Contact us to place an order quoting the below part number.

Part number: 880202
Exhaust Barb

Screws into the exhaust port of the instrument allowing gas to be captured into a sample bag via typical 1/4 ID pipe.


Contact us to place an order quoting the below part number.

Part number: A-31153
Standard Case

Convenient storage for the Tiger instrument range. Contains pre-cut foam inserts allowing the instrument, charger and accessories to be stored.


Contact us to place an order quoting the below part number.

Part number: A-31166
Sensor Cover Screw

The screw is used to keep the sensor cover attached to the back of the Tiger models.


Contact us to place an order quoting the below part number.

Part number: 861234
Tiger PTFE Filters (Pack of 10)

Used to protect the instrument from debris and water ingress.


Contact us to place an order quoting the below part number.

Part number: A-861472
Rubber Boot

Protects your instrument from damage during general use.


Contact us to place an order quoting the below part number.

Part number: 861205
O-Ring (Tiger Filter Clamp)

Used to make an air tight seal ensuring all gas passes through the PTFE filter.


Contact us to place an order quoting the below part number.

Part number: 5/OV-02
Mains Power Adaptors

For use with the charge cradle, allows direct connection with UK, US, EU and AUS power sockets.


Contact us to place an order quoting the below part number.

Part number: 1/VS-22
Housing Clamp

Ensures the filter clamp is held in place ensuring a leak tight seal.


Contact us to place an order quoting the below part number.

Part number: 861218
Calibration Adaptor

Connects to a typical 1/4" ID calibration pipe when calibrating using a gas flow regulator. NOTE: Not to be used with a demand flow regulator.


Contact us to place an order quoting the below part number.

Part number: 861476
USB Cable – Tiger

Fast direct connection between the Tiger instrument range and a computer.


Contact us to place an order quoting the below part number.

Part number: 861230
Premium Plus Case

Rugged case made to accommodate a gas cylinder and accessories.


Contact us to place an order quoting the below part number.

Part number: A-861664
Sensor Seal

The sensor seal is placed on the sensor cover of the Tiger models.


Contact us to place an order quoting the below part number.

Part number: A-861214
Rechargeable Battery

Offers up to 24 hours of continuous use.


Contact us to place an order quoting the below part number.

Part number: A-861240
Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.


Contact us to place an order quoting the below part number.

Part number: 846600
10.6 eV Lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.


Contact us to place an order quoting the below part number.

Part number: LA4TM600