How To Detect Toluene

Formula: C7H8 | CAS: 108-88-3

Download Guide

Back to Gas Guides

Protecting both people and the environment whilst meeting the operational needs of your business is paramount and if you have operations in the UK you will be well aware of the requirements of the Control of Substances Hazardous to Health (CoSHH) regulations and likewise the Code of Federal Regulations (CFR) in the US.

Similar legislation exists worldwide, the common theme being an onus on hazard identification, risk assessment and the provision of appropriate control measures.

Detecting Toluene a member of the BTEX family

Compound | Source | Detection

The Volatile Organic Compounds (VOCs) benzene (B), toluene (T), ethylbenzene (E), and the isomers of xylene (X) also known as BTEX are important industrial solvents which frequently become industrial contaminants. These VOCs, used in gasoline, printing industry, leather industries, and rubber manufacture, produce a large amount of contaminated wastewater that is discharged into the aqueous environment.

The most likely source of BTEX pollution in the environment according to the US Environmental Protection Agency (EPA), is due to leakage from underground gasoline storage tanks into ground water, leaching from landfills, and discharge from factories and refineries.
– ScienceDirect

The presence of toluene in the environment does not always lead to exposure.
In order for it to cause any adverse health effects, you must come into contact
with it. You may be exposed by breathing, eating, or drinking the substance or
by skin contact. Following exposure to any chemical, the adverse health effects that you
may encounter depend on several factors, including the amount to which you are exposed (dose), the way you are exposed, the duration of exposure, the form of the chemical and if you were exposed to any other chemicals.

Public Health England

Source Of Toluene

Toluene also known as methyl benzene is the T in BTEX, and is most commonly used in paint thinners, contact cement, glues, oils, resins, detergents, preparation of chemicals agents, rubber, printing ink, polishes, leather tanning and disinfectants.

The largest release of toluene is during the production, transport, and use of petrol, which contains about 5 to 8 per cent toluene. In remote areas, the concentrations of toluene in air are quite low, however levels from 1.3 to 6.6 Parts Per Billion (ppb) are common in suburban and urban areas, with levels as high as 350 ppb in areas of high traffic density.
– Queensland Government

Toluene Detection

With a seemingly inexorable rise in the production and release of Toluene and the rest of the BTEX family into the environment it is vitally important that the health dangers and legislative provision are understood to ensure that you go beyond compliance.

Rather than having to rely on human senses in a workplace setting it is advisable to use an appropriate form of quantitative monitoring; indeed, the onus is on the employer to do the risk assessment. There are methods published by the Health and Safety Executive (HSE) in the United Kingdom (UK) and National Institute Of Occupational Safety and Health (NIOSH) in the United States (US) that can be used to capture air samples for later analysis but by definition this occurs after exposure could have taken place. Therefore, real-time methods are preferable which can range from fixed, permanent systems for fence line applications, hand-held devices for area measurements or confined space entry and most recently developed, personal monitors that can alert a worker to an immediate hazard.

Download our FREE Guide

“Detecting toluene a member of the btex family”

The detecting toluene a member of the btex family guide which can be downloaded below provides the reader with an in-depth balance of knowledge. The guide covers topics on btex compounds, source of toluene and toluene detection methods using PID.

detecting-toluene-a-member-of-the-btex-family

Download Guide

Related Guides

The Basics Of Toluene

The basics of detecting toluene guide for workers/site safety assists the reader in finding the correct detector to monitor toluene efficiently and safely.

View Details

Gas Detection Equipment for the Detection of Toluene

Tiger Select Portable Benzene Gas Detector

Tiger Select is a portable benzene gas detector with two operation modes for rapid detection of benzene and Total Aromatic Compounds (TACs) providing accurate, reliable data.

Product Details
Cub TAC Personal Benzene Gas Monitor

Cub TAC is a personal benzene gas monitor for fast, accurate detection of total aromatic compounds (TACs) keeping you safe within your working environment.

Product Details
Falco Diffused – Fixed VOC Gas Detector

Falco Diffused, Fixed VOC Gas Detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.

Product Details
Falco Pumped – Fixed VOC Gas Monitor

Falco pumped instruments are ideal for detecting VOCs and TACs in difficult locations such as underground or in confined spaces.

Product Details
Titan Benzene Specific Gas Monitor

Titan fixed benzene specific gas monitor provides continuous detection for plant and worker safety in petrol chemical environments.

Product Details
TVOC 2 Continuous VOC Gas Detector

TVOC 2 is a fixed, continuous VOC gas detector that accurately detects and measures Total Volatile Organic Compounds within industrial working environments.

Product Details

Download your FREE Guide

Simply complete the form below to obtain your FREE Guide on “Detecting Toluene a Member of The BTEX Family”.