
Tiger
Handheld VOC gas detector
The Tiger handheld VOC gas detector is a revolutionary handheld, portable PID instrument for rapid, accurate detection of volatile organic compounds (VOCs).
Our handheld VOC gas detector incorporates ION Science patented photoionisation detection (PID) sensor technology with humidity resistance and anti-contamination design, proven to dramatically extend run time in the field.

Features
The Tiger handheld VOC gas detector provides a dynamic detection range of 0 to 20,000 parts per million (ppm) with a minimum sensitivity of 0.001ppm (1 ppb), offering the widest measurement range of any other VOC detector on the market. This portable, handheld detector has the fastest response time on the market of just two seconds and is just as quick to clear down.
Tiger has been designed for the safe replacement of batteries in hazardous environments. Long-life rechargeable Li-ion batteries give up to 24 hours of use. Fast battery charging allows the instrument to be fully charged in 6.5 hours, while 8 hours of use can be achieved from 1.5 hours charge.
Other instruments in the Tiger range of handheld VOC gas detectors include the low-cost Tiger LT, and the Tiger Select for total aromatic compounds, including benzene.
Ultimate Performance
- Humidity resistant PID sensor for the most challenging environments
- Detects VOCs from 0 up to 20,000 ppm
- Fast 2-second response time and quick clear down
- Detects over 480 VOCs and toxic compounds
- Battery life up to 24 hours continual use
Ultimate Safety
- Torch and back-lit keypad for low light conditions
- Accurate results in all environmental conditions
- Meets ATEX, IECEx, UL, and CSA standards
Ultimate Flexibility
- Large keypad and slim design allow one-handed operation
- Easy to access sensor, electrode stack and lamps
- Easily upgradeable via ION Science website
- Wide range of accessories available
Technical Specification
Specification | Value |
Minimum Resolution | 10.6 eV: 1 ppb or 0.001 mg/m3*** 11.7 eV: 0.6 ppm (600 ppb)*** |
Detectable Range** | 10.6 eV: 1 ppb up to 20,000 ppm*** 11.7eV: 9,000 ppm***# |
Response Time | 10.6 eV: T90 < 2 seconds 11.7eV: <6 seconds |
Accuracy*** | 10.6 eV: ± 5 % display reading ± 1 digit*** 11.7 eV: ± 12 % display reading*** |
Approvals | II 1G Ex ia IIC T4 Ga Tamb = – 15 °C ≤Ta ≤ +45 °C (with lithium ion battery pack) Tamb = – 15 °C ≤Ta ≤ +45 °C (with alkaline battery pack) ITS09ATEX26890X IECEx ITS 10.0036X 3193491 conforms to UL Std. 913, 61010-1 & Certified to CAN/CSA Std. C22.2 No. 61010-1 Class 1 Division 1. Approval for Groups A, B, C & D, T4 |
Battery Life | Li-ion: life up to 24 hours, charge time 6.5 hours Alkaline: 3 x AA, typically 8.5 hours life |
Lamps | 10.6 eV Krypton PID lamp (standard) 10.0 eV and 11.7 eV available |
Data Logging* | 120,000 points including date and stamp |
Communication | Direct USB 1.1 communication |
Calibration | 2 point and 3 point calibration (via calibration kit accessory) |
Alarm | Flashing LEDs Amber (low alarm) Red (high alarm) Sounder 95 dBA at 300 mm (12″) Vibration on alarm programmed TWA and STEL* |
Flow Rate | ≥ 220 ml/min (with blocked flow alarm) |
Temperature | Operating: 10.6 eV: -20 to 60 °C, -4 to 140 °F (non Intrinsically Safe) 11.7 eV: 0 to 60 °C Certified to: 10.6 eV: 15 to +45 °C / +5 to 113 °F (Intrinsically Safe environment) 11.7 eV: 15 to +45 °C / +5 to 113 °F (Intrinsically Safe environment) Storage: -25 to 60 °C / -5 to 140 °F Humidity: 0-99% RH (non condensing) |
Protection | Designed to IP65 (heavy rain) EMC tested to EN61326-1:2006, EN50270:2006 & CFR 47:2008 Class A |
Weight & Dimensions | Instrument (with probe) Width: 340 x height 90 x depth 60 mm (13.4 x 3.6 x 2.4″) Standard case: 367 x 89 x 90 mm (14.45 x 3.54 x 2.36″) Instrument weight 0.72 kg (1.56 lb) Packed weight: 5.5 kg (12lb) |
* Depends on model and gas.
** Maximum reading is obtained with some analytes such as ethanol.
*** Specifications are based on calibration of isobutylene at 20 ° C and 1000 mBar. All specifications shown are at the calibration point and under the same environmental conditions.
**** Based on continuous operation.
# For indicative measurements only. Quoted accuracy achievable up to 2,000 ppm. For more accurate detection, calibration around the concentration of interest is recommended.

What our customers say
View Case StudyView All Case StudiesView All Testimonials”“We needed a cost effective VOC instrument that was accurate, repeatable and user-friendly as our older one was cumbersome and difficult to use. The ION Science Tiger, purchased from Shawcity, fitted our ergonomic requirement whilst providing an affordable and reliable replacement.”
Philip Milne, Clinical Embryologist, Ninewells Hospital Assisted Conception UnitNinewells Hospital chooses the ION Science Tiger

What our customers say
View Case StudyView All Case StudiesView All Testimonials”“We conduct subsoil investigation so it is very important to have in situ information of polluted soils to help us decide the best place to take a sample. Our technical teams work on outdoor sites during all weather conditions so the Tiger’s humidity resistant sensor was the most important feature for our business. Of course, the anti-contamination design was also vital to avoid cross pollution and ensure data integrity.”
Albert Sabanes i Fiter, Director de projectes at GeoambientGeoambient chooses Tiger for humidity resistant sensor
Video Library
Downloads
For supporting resources for the Tiger handheld VOC gas detector, please see below.
Tiger Handheld VOC Gas Detector Accessories and Replacement Parts
There are a number of accessories and replacement parts available for the Tiger handheld VOC gas detector, which can be found below. Please contact us if you would like more information or to place an order.
FAQs
If you have any questions related to the Tiger handheld VOC gas detector, please view our frequently asked questions.
Tiger Handheld VOC Gas Detector Enquiry Form
Please complete the form below and a member of our team will contact you shortly.
Global Distributors
All ION Science distributors are trained to the highest standards to provide you with access to our product portfolio locally, along with the best possible service and support. Find your local representative.