hazardous-voc-gases-thumbnail

Dangerous Gases Within our Healthcare Facilities

At this time in crisis, we need to be protecting those keeping us safe
Download Guide

Back to Industry Guides

Doctors, nurses as well as all the other healthcare workers and patients may be exposed to a wide range of chemicals emitted from various sources such as disinfectants and sterilitants (ethylene oxide, glutaraldehyde, formaldehyde, alcohols), anesthetic gases, (isoflurane and sevoflurane) laboratory or pharmaceutical products, some of which have been shown to cause allergic reactions such as conjunctivitis, rhinitis or contact dermatitis and even occupational asthma.

Hazardous VOC Gases Found Within Hospitals

At this time of crisis, we need to be protecting those keeping us safe. Hospitals are clean sterile environments, but very little is known about the chemical condition of indoor air in hospitals.

A buildup of harmful VOCs inside can result in what is called Building Related Illness or Sick Building Syndrome. Sick Building Syndrome can cause symptoms that include headaches, difficulty concentrating, irritability, brain fog, depression, dizziness, nausea, allergies, asthma, irritated skin, eyes, nose, and throat. Removal of these harmful VOCs often results in rapid relief in symptoms.

For all compounds, concentrations measured were lower than concentrations known to be harmful in humans. However, results showed that indoor air of sampling locations contains a complex mixture of VOCs. Further multicenter studies are required to compare these results. A full understanding of the exposure of healthcare workers and patients to complex mixtures of chemical compounds can then be related to potential health outcomes.

National Library of Medicine National Institutes of Health

Exposure To VOCs In Healthcare Settingshazardous-voc-gases-hand-sanitiser

The use of alcohol-based hand rubs are highly recommended for hand hygiene to reduce hospital-acquired infections. Most commercially available contain 70% by weight of ethanol and isopropanol during hygienic hand disinfection, users would be exposed, for short periods, to a sudden change in ethanol concentrations from 0 to 14.3 mg/L.

Even though many airborne contaminants within a clinical setting can be removed using high-efficiency particulate air (HEPA) filtration. This method alone will not remove VOCs.

Ultimately limitation and control of VOC build-up in a hospital is the most effective way of ensuring that our dedicated healthcare works are patients have limited exposure to these compounds.
This can be done in a number of ways:

  • Room separation
    Restricting the passage of air between clinical procedures room by double-door gasketed windows which prevents the passage of VOCs from one room to another.
  • Furniture
    Avoiding wood or polished or painted furniture which can give off formaldehyde and other VOCs. Alternatively using steel furniture which can be washed beforehand and then outgassed is preferable as the VOC concentration released is much lower.
  • Out-gassing plastic
    Ensuring plastic equipment such as petri-dishes and pipettes are opened in plenty of time and in a separate room to allow it to vent and out-gas.
  • VOC-free paints and cleaning products
    Using paints that are guaranteed to be VOC free and alternative cleaning products that are free from ethanol helps to limit additional VOC exposure.
  • Laboratory workers
    Limiting the use of cosmetics, perfumes and smoking of all staff working in the lab.

Download our FREE Guide

“Hazardous VOC Gases Found Within Hospitals”

The hazardous VOC gases found within hospitals guide which can be downloaded below provides the reader with an in-depth balance of knowledge outlining the danger in which can circulate around the air in our healthcare facilities. VOCs build-up from many of product that are used which means loads of healthcare workers are exposed every day without even knowing. In general terms, the two most widely used technologies to measure total VOCs are Flame Ionisation Detection (FID) and Photoionisation Detection (PID). Both technologies rely on the principle that when most organic vapours burn they produce positively charged carbon ions as an intermediate product of combustion.

hazardous-voc-gases-found-within-hospitals

Download Guide

Related Guides

Benzene Detection – Fixed Instruments

Benzene Detection (Fixed Instruments) - ION Science's Fixed Photoionisation Detectors protect workers and the public from benzene exposure

View Details

Detecting Volatile Organic Compounds In Laboratories

Detecting Volatile Organic Compounds is crucial while there is a high rise in the use of sanitisers and disinfectants within our healthcare facilities.

View Details

Gas Detection Equipment – Choosing The Right Type

Gas detection for safety is pivotal, so Ion science cuts no corners when it comes to our gas detectors. Explore our variety of gas detectors today!

View Details

Gas Detection Instrument – Do you Require One In Your Industry?

The Gas detection Instrument guide will help you understand the requirement for each type of instrument and which will be best suited to your industry.

View Details

Gas Detection Equipment For Detecting Volatile Organic Compounds Within Our Healthcare Facilities

Tiger Handheld VOC Gas Detector

The Tiger handheld VOC gas detector is a revolutionary portable PID instrument for rapid, accurate detection of volatile organic compounds (VOCs).

Product Details
Tiger LT Portable VOC Gas Detector

The Tiger LT portable VOC gas detector is an entry-level, portable instrument for fast, accurate detection of volatile organic compounds (VOCs).

Product Details
Tiger Select Portable Benzene Gas Detector

Tiger Select is a portable benzene gas detector with two operation modes for rapid detection of benzene and Total Aromatic Compounds (TACs) providing accurate, reliable data.

Product Details
Cub 10.6 eV Personal VOC Gas Detector

Cub 10.6 eV personal VOC gas detector is worn within the breathing zone to detect volatile organic compounds, keeping you safe within your working environment.

Product Details
Falco Diffused – Fixed VOC Gas Detector

Falco Diffused, Fixed VOC Gas Detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.

Product Details
Falco Pumped – Fixed VOC Gas Monitor

Falco pumped instruments are ideal for detecting VOCs and TACs in difficult locations such as underground or in confined spaces.

Product Details
Titan Benzene Specific Gas Monitor

Titan fixed benzene specific gas monitor provides continuous detection for plant and worker safety in petrol chemical environments.

Product Details
TVOC 2 Continuous VOC Gas Detector

TVOC 2 is a fixed, continuous VOC gas detector that accurately detects and measures Total Volatile Organic Compounds within industrial working environments.

Product Details
GasClam 2 Continuous Ground Gas Detector

GasClam 2 continuous ground gas detector is a unique in-borehole gas monitoring system developed for the unattended collection of long-term gas data.

Product Details
Fire Investigation Kit

Tiger fire investigation kit provides fast, accurate detection of VOCs for fire and arson investigations with resistance to humidity and contamination.

Product Details

Download your FREE Guide

Simply complete the form below to obtain your FREE Guide on “Hazardous VOC Gases Found Within Hospitals”.