Falco Diffused Gas Detector
Fixed VOC Gas Detection 0 – 50 ppm
Detection Range: 0 – 50 ppm
Stack Colour: Orange
Lamp: 10.6 eV
Calibration Points: 2 – points
Sensitivity: 0.01 ppm
Fixed VOC Gas Detection 0 – 50 ppm
The Falco fixed VOC Gas Detector, Diffused model, is an intrinsically safe and ATEX certified instrument making it approved for use in ATEX-zoned hazardous areas. Our fixed gas monitor is designed with Typhoon technology, making it able to withstand exceptionally harsh environments, including 0-100% relative humidity and condensing humidity, and temperatures from -40 to +50 °C without any compromise in performance.
In addition, the Diffusive model also has an externally located Intrinsically Safe sensor for quick and easy servicing without the need for a hot work permit and only requires annual maintenance. Dual certification allows your fixed VOC gas detector to be serviced and calibrated in a hazardous environment without having to remove power!
When you have the right gas detection system in place, your workers and site stay safe, and work continues smoothly.
The Falco Diffused Kit Includes
Enabled with both Modbus and 4-20mA output protocols the Falco offers site-wide networking capabilities, making it equally suitable for large refineries, smaller manufacturing plants or even wastewater processing sites. With the ability to place Falco wherever it’s needed with confidence, the device assures you that whether you’re monitoring VOCs in one area of the plant or want to cover a whole site, Falco can deliver the results you need.
Our standard kits contains the following:-
- Falco MiniPID (6-Pin) Orange
- Warranty Registration Card
- Safety Notice for Falco Instrument
- PID Lamp Cleaning Kit
- Falco no pump c/w Rj45 Cable
- MiniPID Electrode Stack Removal Tool
- Package Information Card
Technical Drawings
For protection in explosive areas the FALCO’s Main Unit electronics are fitted in an ExD enclosure and the PID Sensor Head utilises intrinsically safe electronics. For measurement and fitment details please see below to understand if the Falco instrument is fit for your requirement. Should you need further support or information, contact us directly or visit the resource centre and download the Falco Manual.
Technical Specification
Specification | Value |
|---|---|
| Sensor | Photoionisation detector |
| Detection ranges and sensitivity with 10.6 eV lamp fitted* | 10.0 ppm, 0.001 ppm 50.0 ppm, 0.01 ppm 1000 ppm, 0.1 ppm 3000 ppm, 1 ppm |
| Detection ranges and sensitivity with 10.0 eV lamp fitted* | 50.0 ppm, 0.01 ppm |
| Response Time (T90) | Diffused models: <30 seconds** |
| Accuracy | ± 5 % or ± 1 digit |
| User Interface | OLED high contrast white on black: 128 x 64 pixels Screen size: 35 mm (w) x 17.5 mm (h) 5 magnetic switches with LED confirmation (up, down, left, right and enter) |
| Status indicator | Bright visible status indicator: RED, AMBER, GREEN |
| Output | 4 – 20 mA 2 programmable relays RS 485 Modbus |
| Falco diffused environmental specification | Operational Temperature: – 40 to 50 °C 0-100 % RH and condensing humidity Storage temperature: – 40 to 60°C |
| Ingress Protection | Main Unit:IP65 Sensor Head: IP65 |
| Power | Working voltage: 12 to 40 Vdc Typical 2 W, Max 7 watts |
| Mechanical Interface | 2 x cable entry points with 3/4″ NPT threads (left and right) |
| Mounting Points | 2 x M8 |
| Weight and Dimensions | 2.9 kg 205 (h) x 191 (w) x 125 (d) mm |
| EMC | EMC Directive 2014/30/EU |
| Certification | II 2G db ib IIC T4 Gb Class 1, Div 1 Groups ABCD T4 ISO9001:2015 |
* All specifications quoted are at calibration point and under the same ambient conditions.
Specifications are based on isobutylene calibration at 20 °C and 1000 mBar.
** When set to continuous measurement
Modbus® is a registered trademark of Schneider Electric
Accessories and Replacement Parts
There are a number of accessories and replacement parts available for the Falco fixed voc gas detector, which can be found below. Please contact us if you would like more information or to place an order.
Related Products
Falco diffused 0-10
Falco TAC Diffused, fixed gas detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.
Falco diffused 0-1000
Falco TAC Diffused, fixed gas detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.
Falco diffused 0-3000
Falco TAC Diffused, fixed gas detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.
Falco diffused 0-50
Falco TAC Diffused, fixed gas detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.
Falco diffused 0-50tac
Falco TAC Diffused, fixed gas detector is ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.
SF6 AreaCheck P2 – Fixed Gas Detector
Fixed SF6 gas detector uses award winning Negative Ion Capture (NIC) technology and is designed to continuously monitor SF6.
TVOC 2 Continuous VOC Gas Detector
TVOC 2 is a fixed, continuous VOC gas detector that accurately detects and measures Total Volatile Organic Compounds within industrial working environments.
FAQs
If you have any further questions, please enquire now.
United Kingdom
USA
France
India
China
Italy
Germany
